Publicidad
Idiomas disponibles
Idiomas disponibles
Generac Portable P roducts 2,500 PSI High Pressure Washer
• Insert t hecarriage boltthrough t heright s ide hole from
theoutside o ftheunit. S lide thespring cllpupthe
chemical hose andslide it ontothecarriage bolt.Attach
a plastic k nob fromtheinside oftheunit. T ighten b y
hand (Figure 2 )
• Insert t hecarriage boltthrough t heleftside hole from
theoutside o ftheunitand attach a plastic k nob fromthe
inside oftheunit(viewing u nitfromtherear). T ighten b y
hand (Figure 3 ).
• Attach thecllptothelower frontaccessory trayflange
to prevent chemical hose fromcontacting engine m uffler
(Figure 6 ).Slide thechemical hose through t hemetal clip
sothatit istightbutnotkinked.
• Insert t he"J"hookintothesecond f romtheleftslotin
theaccessory tray(Figure 4).
Add Engine Oil
IMPORTANT:
Any attempt to crank or start the engine
before it has been properly serviced with the
recommended oil may result in an engine failure.
• Place pressure washer on a level surface.
• Refer to the engine owners manual to add recommended
oil to engine.
NOTE: Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.
Add Gasoline
_
ANGER!
Never
fill fuel tank indoors. Never
fill
fuel tank when engine is running or hot. Do Not
smoke when filling fuel tank.
• Pinch the chemical hose and slide it into the metal clip as
_,
WARNING!
Never fill fuel tank completely full.
shown in Figure 5.
_
Provide space for fuel expansion. Wipe away any
fuel spillagefrom engine and equipment before
starting.
/
6
Publicidad
