The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
IMPORTANT SAFETY INSTRUCTIONS
Read all safety warnings and all instructions in this manual and in the battery
charger manual. Failure to follow the warnings and instructions may result in elec-
tric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not allow children to use the cordless work-
light. It is intended for professional use. Chil-
dren can unintentionally blind themselves or
other persons.
Do not operate area lights in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Area lights create heat
and sparks which may ignite the dust or fumes.
Do not expose area lights to rain or wet condi-
tions. Water entering an worklight will increase
the risk of electric shock or fire.
After the automatic shut-off of the cordless
worklight, do not continue to press the On/Off
button. The battery could become damaged.
Do not direct the light beam at persons or ani-
mals and do not stare into the light beam your-
self (not even from a distance).
Do not turn on/off the light without line of
sight to the light. Operator working near the
light may be startled by the sudden bright light
(turn light on) or left out in the dark (turn light
off). Turning light on/off when there is operator
near the light can cause personal injury or prop-
erty damage.
2
1600A02WU3 GLI18V-800 202306.indd 2
page heading
Safety Symbols
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
SAVE THESE INSTRUCTIONS
Do not cover the lamp head while operating
the cordless worklight. The lamp head heats
up during operation and can cause burns or fire
when the heat accumulates.
Do not use the cordless worklight in road traf-
fic. The cordless worklight is not approved for
illumination in road traffic.
Remove the battery from the cordless work-
light before any work on the cordless worklight
itself (e.g. assembling, maintenance, cleaning,
etc.), as well as when transporting and storing.
Do not position the lighted worklight head on
or near flammable or combustible materials.
The lens gets hot during use.
Do not touch the lens while the worklight is in
operation. Touching hot lens increases the risk
of personal injury.
Do not splash the lens of lighted worklight
with liquids. Hot lens may shatter when cooler
liquids are contacted.
The worklight is ruggedly constructed. It
should, however, be handled with care.
Use only original Bosch accessories.
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe han-
6/19/23 11:22 AM