Publicidad
Idiomas disponibles
Idiomas disponibles
If you fold up the worklight with the illuminated
portion of the Lamp Head 2 in the direction of
the Battery Holder 4, the worklight will switch
off automatically.
Temperature Dependent
Overload Protection
In order to protect both the user as well as the
worklight, the worklight switches off if the tem-
perature reaches 140°F (60°C). Allow the work-
light to cool down, then switch the worklight on
again.
Do not continue to press the
On/Off
cordless worklight has been automatically
switched off. The battery can be damaged.
Low Battery Warning
Shortly before the worklight switches off be-
cause of a low battery, it will flash 3 times and
shine with reduced brightness.
Run Time
The run time will depend on the Bosch battery
or AMPShare battery capacity and the bright-
ness setting of the worklight. The run time on
the high brightness setting will be 150 minutes
per Ah of the battery pack on the GLI18V-800.
Swiveling Stand
(Fig. 3, 4)
— The Lamp Head 2 can be swiveled 360° in 21
degree steps to suit the application (Fig. 3).
— The Lamp Head 2 can be tilted up 180° in 7
settings and be used as an uplight with the
lamp aimed upwards (Fig. 4).
Utility Hook
(Fig. 5)
Your worklight is equipped with a convenient
utility hook 3 for hanging the worklight. To use,
simply lift up the Lamp Head 2 and then lift up
the utility hook 3 into the open position (Fig. 5).
— Select a suitably sized and shaped object that
will provide adequate hanging stability. An
unstable hanging surface could result in the
worklight unexpectedly falling.
8
1600A02WU3 GLI18V-800 202306.indd 8
Operation
switch
after
the
Fig. 3
360°
Fig. 4
180°
2
Fig. 5
30°
6/19/23 11:22 AM
Publicidad
