Publicidad
Idiomas disponibles
Idiomas disponibles
Cautions
• Turn o the power before performing maintenance.
• Only quali ed personnel by UJUETA MÉXICO, S.A. DE C.V., can repair the welder. Uncovering and handling the machine
can lead to serious risks. Seek help from the nearest Authorized Service Center if you nd fault with equipment
operation.
• Be sure to consider the special requirements for working in spaces with risk of re or explosion.
• Never weld bicycle frames or ratchets, parts of vehicle steering, trailer tow bars, etc.
• Make sure the machine is adequately ventilated, do not locate it too close to walls with a minimum separation of 10 cm.
Do not rest the machine on the vents. Do not place the machine in a lateral and horizontal position. The welder is not
designed to be mounted on racks or on trolleys. Placing the welder at inclinations greater than 10 ° from the horizontal
may result in its overturning.
• Electronic devices near electronic welding machines can experience interference due to the high levels of current
produced during the process. Turn o nearby computer equipment as a precaution. If interference occurs outside of the
immediate area where the process is taking place, have a quali ed electrical technician check the grounding of the
electrical connection used to operate the machine.
• The welding process can a ect medical devices such as pacemakers. If you are a user of these devices stay away and
consult your doctor.
• Never use the machine for other activities or operations other than welding.
• Moving parts, such as fans, can cause personal injury. Stay away from them and do not insert objects on them or
obstruct them.
• Do not move the gas cylinder when the regulator valve is in place. Attach the gas cylinder securely, upright to a wall
rack or special cart.
• Always close the gas cylinder valve and then the regulator valve.
7
YEAR
WARRANTY
Publicidad
