Publicidad
Idiomas disponibles
Idiomas disponibles
13.11 Vibrator function
When receiving a call tone, the Twintalker 9100 can also vibrate.
To set the Roger Beep.
• Press
• Press
• Press
13.12 Roger Beep On/Off
After the
- button is released, the unit will send out a roger beep to confirm that you have
PTT
stopped talking.
To set the Roger Beep.
• Press
• Press
• Press
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
• Press
• Press
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
• Press
• Press
• Press
SUB-CHANNEL SELECTION
• Press
• Press
To disable the function select 'OFF' when setting the channel.
Topcom Twintalker RC-6404
5 times. '
' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
6 times. 'ro' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
7 times. 'to' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
PTT
8 times, DCM OFF appears on the display.
or
to change the channel.
to confirm the channel selection and go to CTCSS
or
to change the CTCSS.
to confirm.
PTT
Topcom Twintalker RC-6404
disable (OF) the Vibrator .
disable the Roger-Beep (OF).
disable the key Tones (OF).
11
Publicidad
