Call Tones; Roger Beep On/Off; Key-Tone On/Off - Topcom TwinTalker 3700 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41

12.10 CALL TONES

A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
• Press
• Press
PTT
b. Sending a call Tone
Press
briefly. The call tone will be transmitted for 3 seconds on the set channel.

12.11 ROGER BEEP ON/OFF

After the
- button is released, the unit will send out a roger beep to confirm that you have stopped
PTT
talking.
To set the Roger Beep.
• Press
• Press
• Press
PTT

12.12 KEY-TONE ON/OFF

When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
• Press
• Press
PTT
12.13 DUAL CHANNEL MONITOR FUNCTION
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive signals
transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
• Press
• Press
• Press
SELECTION
• Press
• Press
To disable the function select channel 'O'
When the Dual Channel Monitor function is activated, the PMR will switch sequentially between the
standby channel + CTCSS and the Dual Channel + CTCSS.
TOPCOM TWINTALKER 3700
4 times. CA will be displayed.
or
to select another call tone or select OF to enable call tones.
to confirm your selection and return to the standby mode.
5 times. 'ro' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
6 times. 'to' will be displayed.
to enable (ON) or
to confirm your selection and return to the standby mode.
7 times, DCM appears on the display.
or
to change the channel.
to confirm the channel selection and go to CTCSS SUB-CHANNEL
or
to change the CTCSS.
to confirm.
TOPCOM TWINTALKER 3700 DCP
disable the Roger-Beep (OF).
disable the Roger-beep (OF).
9

Publicidad

Tabla de contenido
loading

Tabla de contenido