Kärcher SC 5 EasyFix Iron Plug Manual Del Usuario página 13

Pressure controller
The pressure controller keeps the pressure in the steam
boiler as constant as possible during operation. The
heating is switched off when the maximum operating
pressure is reached in the steam boiler and is activated
if there is a pressure drop in the steam boiler as a result
of a steam removal.
Safety thermostat
The safety thermostat prevents the device from over-
heating. If the pressure regulator and the boiler thermo-
stat fail and the unit overheats, the safety thermostat
switches the unit off. Before resetting of the safety ther-
mostat, contact the responsible KÄRCHER Customer
Service.
Boiler thermostat
The boiler thermostat switches off the heating in the
event of a fault; for example, if there is no water in the
steam boiler and the temperature in the steam boiler ris-
es.
As soon as you refill the water, the device is ready for
use again.
Maintenance lock
The maintenance lock seals the steam boiler from the
steam pressure present. The maintenance cap is also a
pressure relief valve. If the pressure regulator is defec-
tive and the steam pressure in the steam boiler rises,
the pressure relief valve opens and steam is escapes
through the lock.
Prior to restarting the device, contact the responsible
KÄRCHER Customer Service.
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page.
Illustration A
Device socket with cover
1
Water reservoir
2
Carrying handle for the water reservoir
3
Selector switch
4
Control panel
5
Display - OFF position
6
Display - water shortage (red)
7
Display - heating (green)
8
Steam stage 1
9
Steam stage 2
10
Steam stage 3
11
Steam stage 4
12
VapoHydro function steam stage
13
Display - iron detection
14
Display - steam gun detection
15
Cap for accessory compartment
16
Maintenance lock
17
Carrying handle
18
Holder for accessories
19
Accessory storage compartment
20
Mains connection cable storage compartment
21
Park bracket for floor nozzle
22
Mains connection cable with mains plug
23
Non-driven wheels (2 x)
24
Steering roller
25
Steam gun
26
Steam lever
27
Unlocking button
28
Child lock
29
Steam hose
30
Steam connector
31
Spotlight nozzle
32
Round brush (small, black)
33
** Round brush (small, yellow)
34
** Power nozzle
35
** Round brush (large)
36
Manual nozzle
37
Microfibre cover for manual nozzle
38
Extension tubes (2 x)
39
Unlocking button
40
Floor nozzle
41
Hook and loop fastener
42
Microfibre floor cloth (2 x)
43
** Carpet glider
44
Descaler
45
** Steam pressure iron
46
Indicator light (orange) - heating
47
Steam switch (bottom)
48
Steam connector
49
** optional
Installing accessories
1. Open the cover on the device socket.
Illustration B
2. Connect the steam connector to the device socket
so that the steam connector audibly engages.
Illustration B
3. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration H
4. Push the open end of the accessory onto the spot-
light nozzle.
Illustration I
5. Connect the extension tubes with the steam gun.
English
Installation
13