Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
Before cleaning, always disconnect the blender from the power socket and leave it to
completely cool.
CLEANING
1. MOTOR BODY
Clean the motor body with a soft cloth or slightly dampened sponge and dry with a cloth.
HAZARD!
IMMERSE IN LIQUIDS!
2. FOOD BLENDER LID AND WHISK SUPPORT
Clean the food blender lid and whisk support with hot water and dishwashing detergent.
DO NOT WASH IN THE DISHWASHER!
3. SHAFT, BLADES, WHISK, GLASS AND CONTAINER
These can be washed in the dishwasher at a maximum temperature of 55°C, or with hot
water and dishwashing detergent. Hand washing is recommended so as not to alter the
characteristics of the materials.
CAUTION!
Exercise caution when handling the chopping blade.
IMPORTANT NOTE
steel wool or abrasive detergents for cleaning.
STORAGE
Leave the appliance to fully cool before stowing it or winding the power cord.
Check that all the parts are clean and dry before putting them away.
Never stow the appliance while it is still wet.
It is recommended to store the appliance in a dry, clean place far from moisture and dust.
TROUBLESHOOTING
Problem
The immersion blender does not turn on. Check that the plug is properly inserted in the socket.
The immersion blender stops during
use.
The immersion blender blades cause Immerse the shaft deeper into the ingredients to be
DO NOT WASH IN THE DISHWASHER OR
:
: Do not use chemical detergents,
Solution
In case of an overload or jam, the blender automatically
turns off to avoid damage to the motor. Split processing
into smaller quantities. For certain recipes, adding liquids
into the carafe can reduce motor strain.
25
Publicidad
