Publicidad
Idiomas disponibles
Idiomas disponibles
OPTION 3
Power supply using a DIN rail power supply unit
Alternatively to the mains adapter, we offer DIN rail power supplies in our online shop, which can be installed by
a specialist. The network connection is then made via a network cable or alternatively via WiFi.
7
CONNECTING THE DEVICE
It is possible to connect the cables and wires to the device conveniently
and safely via the labeled screw connection terminal. You can connect all
necessary cables and wires to the device now.
Please remove any cables and wires from the connection ports
NOT IC E
of the device that you do not need.
The product comes with a disassembly tool that allows you to safely
remove the connector from the screw terminal socket. Please do not use
any other tool, e.g. a screwdriver, as this may damage the circuit board
of the device.
Port
LAN/POE
T+ T- R+ R-
LAN / POE
T+
T-
R+
R-
Description
The device does not have an integrated standarized RJ45 socket to ensure ...
• that the device rests as flat as possible on the wall.
• that no wall needs to be levered up.
• that a strong and inflexible Cat.6 or Cat.7 installation cable can be used.
Use only four wires (1, 2, 3 and 6) of a standard Network cable Cat.5 or better,
coming from the Internet Router/PoE-Switch/PoE-Injector.
Cat.5 / Cat.6 Network cable
T+ White and orange network cable wire (Number 1, Transmit Data +)
T - Orange network cable wire (Number 2, Transmit Data -)
R+ White and green network cable wire (Number 3, Receive Data +)
R - Green network cable wire (Number 6, Receive Data -)
For easier installation we strongly
recommend to remove the plug from
screw connection terminal while you
connect the cables and wires.
R1
R1
R2
R2
15
VDC
–
+
11
Publicidad
