Publicidad
Idiomas disponibles
Idiomas disponibles
d) Under
abusive
conditions,
liquid may be ejected
from
the battery,
avoid contact,
if
contact
accidentally
occurs,
flush
with water,
if liquid contacts
eyes, additionally
seek
medical
help. Liquid ejected
from the battery may cause irritation
or burns.
6) SERVICE
a) Have your
power
tool serviced
by a qualified
repair
person
using
only identical
replacement
parts.
This will ensure
that the safety of the power
tool is maintained.
Specific
Safety RuHes
. Hold power tool by insulated
gripping
surfaces,
when performing
an operation
where
the
cutting
accessory
may contact
hidden
wiring.
Cutting
accessory
contacting
a "live" wire may
make exposed
metal parts of the power
tool "live" and could give the operator
an electric
shock.
. Use auxiliary
handle(s}
if supplied
with
the tool.
Loss of control can cause personal
injury.
° Use clamps
or another
practical
way to secure
and support
the work piece to a stable
platform.
Holding the work by hand or against your body leaves it unstable
and may lead to loss of control
o When not in use, place tool on its side on a stable surface
where it will not cause a tripping
or
failing
hazard.
Some tools wit,# large battery packs will stand upright but may be easily knocked
over.
° Keep your
hair, clothing,
and gloves
away from air vents. Air vents often cover moving
parts in
which these items can be caughL
. Hold tool firmly
with two hands,
one hand on the handle, and the othergripping
the bottom
around the battery area. Use auxiliary handle
ff provided.
Loss of control can cause personal
injury.
zLWARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction
activities contains chemicals known to the State of California to cause cancer,
birth defects or other reproductive
harm. Some examples of these chemicals
are:
, lead from lead-based paints,
, crystalline silica from bricks and cement and other masonry products, and
, arsenic and chromium from chemica@-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
, Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other
construction
activities. Wear protective clothing and wash exposed areas with soap and
water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of
harmfu! chemicals.
2_WARNING:
use of this tool can generate
and/or
disperse
dust, which
may cause serious
and permanent
respiratory
or other
injury.
Always use NIOSH/OSHA
approved
respiratory
protection
appropriate
for the dust exposure.
Direct particles away from face and body.
° Wear appropriate
hearing
protection
during
use. Under some conditions
and duration
of use,
noise from this product
may contribute
to hearing loss.
z_WARNING:
ALWAYS
use safety
glasses.
Everyday
eye glasses
are NOT safety
glasses.
Also
use face or dust mask if cutting
operation
is dusty.
ALWAYS
WEAR
CERTIFIED
SAFETY
EQUIPMENT:
° ANSI Z87,1 eye protection
(CAN/CPA
Z94,3),
° ANSI S12,6 (S3,19) hearing
protection,
° NOSH/OSHA
respiratory
protection,
Publicidad
