Descargar Imprimir esta página

Gumotex PULSAR 380 Manual De Usuario página 10

Ocultar thumbs Ver también para PULSAR 380:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Owner's Manual
Design category D pursuant to Directive 2013/53/EU of the European Parliament and of the Council.
A watercraft given design category D is considered to be designed for a wind force up to, and including, 4 and signi-
ficant wave height up to, and including, 0.3 m/12 inches, with occasional waves of 0.5 m/20 inches maximum height.
Design category
A
B
C
D
Watercraft in each design category must be designed and constructed to withstand the parameters in respect of stabi-
lity, buoyancy, and other relevant essential requirements listed in this Annex and to have good manoeuvrability.
The boat has been manufactured in compliance with the EN ISO 6185-1 Standard, Category I.
Related standards: EN ISO 10087, EN ISO 10240, EN ISO 14945.
Dear Customer,
This manual will help you to easily and safely master your vessel.
It contains a detailed description of the vessel, the supplied or built-in
equipment, its sets as well as information about its control and mainte-
nance. Please read it carefully, thereby getting to know the boat before
actually using it.
If this is your first vessel or you have changed the type of vessel and
do not know this type well, please get acquainted with its maintenan-
ce and control prior to your first individual use of the vessel so that it
is safe and comfortable. Your dealer or the National Yacht Federation
or club will recommend you appropriate training courses or qualified
instructors.
Do not pull out until the expected sailing conditions (wind force and
wave height) comply with the construction category of your boat and
you and your crew are able to control the boat in such conditions.
Please keep this Guide in a safe place and hand it over to the new
owner if you sell the boat.
1. Table of Specifications
(indicative values)
Length (cm) [ft.-in.]
Width (cm) [ft.-in.]
Perimeter cylinder dia. (cm) [in.]
Number of air chambers
Max. operating pressure (MPa)
Max. loading capacity (kg) [lbs.]
Max. number of persons
NITRILON version weight (kg) [lbs.]
Weight of NITRILON with wear-proof CR-film (kg) [lbs.]
NITRILON EXTRA version weight (kg)
Weight of NITRILON EXTRA with wear-proof CR-film (kg) [lbs.]
Packed raft dimensions (cm) [in.]
No. of transverse cylinders
Application range
Float draught (cm) [in.]
Highest solid point above water level (cm) [in.]
10
PULSAR
up to, and including, 8
up to, and including, 6
up to, and including, 4
Wind force
(Beaufort scale)
exceeding 8
TABLE OF CONTENTS:
1. Table of Specifications
2. Technical Description
3. Inflation Instructions
4. Using the the boat
5. Folding of the boat
6. Treatment and Storage
7. Guarantee Conditions
8. Boat Repairing
9. Product Disposal Method
10. Packaging Disposal Method
11. Type Parameters Tag
12. Safety Caution
PULSAR 380
PULSAR 420
380 [12-6]
420 [13-10]
178 [5-10]
190 [6-2]
50 [20]
53 [21]
5 + 2
650 [1433]
800 [1764]
7
44 [97]
50 [110]
51 [112]
58 [128]
51 [112]
58 [128]
58 [128]
66 [146]
80 × 65 × 40
85 × 65 × 40
[32 × 26 × 16]
[33 × 26 × 16]
2
WW 5
WW 5
20 [8]
20 [8]
80 [32]
83 [33]
VERSION 1/2024
EN
Significant wave height
(H 1/3, m)
exceeding 4
up to, and including, 4
up to, and including, 2
up to, and including, 0.3
PULSAR 450
450 [14-10]
210 [6-11]
55 [22]
5 + 2
5 + 3
0.025 [0.25 Bar / 3.7 PSI]
900 [1984]
8
9
60 [132]
69 [152]
69 [152]
78 [172]
90 × 70 × 35
[35 × 28 × 14]
2
3
WW 5
20 [8]
87 [34]
page 10
11
11
11
11
12
12
12
12
12
12
13
PULSAR 560
560 [18-5]
210 [6-11]
56,5 [22]
5 + 3
920 [2028]
12
75 [165]
83 [183]
86 [190]
96 [212]
100 × 70 × 50
[39 x 28 x 20]
3
WW4
20 [8]
88 [35]

Publicidad

loading

Este manual también es adecuado para:

Pulsar 420Pulsar 450Pulsar 560