Publicidad
Idiomas disponibles
Idiomas disponibles
Before operating the actuator, always check that the product is engaged in the correct position
5.5 CHAIN STROKES ADJUSTMENT
It is possible to adjust the stroke of the chain millimetrically through theAPP or manually through the special trimmer on the
front of the actuator. Below is the table with the various chain lengths corresponding to the positions of the trimmer.
POSITION TRIMMER NO.1
POSITION TRIMMER NO.2
POSITION TRIMMER NO.3
POSITION TRIMMER NO.4
6. MAINTENANCE, EMERGENCY MANOEUVRES, CLEANING
If it is necessary to manually disengage the actuator from the window, for example to carry out a replacement or maintenance
work on the system, follow the procedure illustrated in paragraph "5.2 Installation sequence"in reverse order.
ATTENTION DANGER OF THE WINDOW FALLING: the panel could fall because it is no longer held by the chain. After maintenance
and/or cleaning, repeat the procedure illustrated in "5.2 Installation sequence".
7. ENVIRONMENTAL PROTECTION
The actuator contains non-recyclable parts inside (plastic materials and electronic parts) that are not part of normal waste. They
must be disposed of properly. For any questions, please contact the waste disposal company.
ATTENTION
NO
STROKES SELECTABLE BY SNAP TRIMMERS
200mm STROKE
250mm STROKE
300mm STROKE
360mm STROKE
!
OK
<1 mm
27
Publicidad
