Simpson Strong-Tie Timber Drive Manual Del Operador página 2

Safety Overview
CAUTION: Safety and operation of the drill motor are not considered in this manual. See
the operating and safety instructions for the drill motor used with the tool for drill motor
capabilities and operation.
Study this manual before operating the tool and understand the safety warnings and
cautions. Keep the manual with the tool for reference.
CAUTION: Eye protection that conforms to ANSI Z87.1 and provides protection against
flying particles both from the front and the side should be worn by the operator and
others in the work area when loading, operating and servicing the tool. Eyewear without
side shielding does not provide adequate protection.
CAUTION: Additional safety protection will be required in some environments. Stay alert.
• The work area may include exposure to falling objects that could cause head injury.
• Noise levels could lead to hearing damage.
• Sharp objects could cause hand injury.
• A tripping hazard may be present if electric extension cords are being used.
• Dress appropriately when using the tool.
ADDITIONAL SAFETY WARNINGS
• Keep work area clean and well lit.
• Do not operate Timber Drive
• Always use caution when using corded tools in damp/wet conditions to
avoid electric shock.
• The use of Timber Drive system can cause sparks; do not use in the presence of
flammable liquids, dust or gases.
• Guard against electrical shock.
• Never modify a power tool plug, and always use a plug with a matching outlet.
• Keep cords away from physical hazards and replace damaged cords immediately.
• When operating electrical tools outside, use extension cords suitable to exterior use.
• Use the included side handle to prevent wrist injury during screw driving.
2
© 2023 Simpson Strong-Tie Company Inc. T-F-TIMBRDRV23 8/23
system in dangerous environments.
™