Simpson Strong-Tie Timber Drive Manual Del Operador página 5

4. Adjust the screw diameter setting.
5. Match the nosepiece to your configuration.
n
m
Use Allen wrench to change configurations.
a) Use the nose plate for
wood-to-wood connections.
6. Attach the tool to your driver motor of choice
Motor must be equipped with G2 adapter.
If you're not sure which driver motor you need, refer to strongtie.com/timberdrive for a full
list of motor recommendations. DeWalt
structural screws.
4
5
b) Remove the nose plate for positive placement
metal-to-wood (connector) fastening.
To adjust or remove driver motor, depress lever.
DW269 #DW269QD recommended for larger
®
© 2023 Simpson Strong-Tie Company Inc. T-F-TIMBRDRV23 8/23
Rotate orange Screw Diameter
Adjustment to the desired screw diameter.
Small Diameter: #10 up to #12
Medium Diameter: #14 up to .315" OD
Large Diameter: .394" OD
See strongtie.com/timberdrive for a full
list of tool setup recommendations.
5