Package contents
- CANICALM First collar fitted with short contact points
- nylon strap
- Lithium 3-V CR2 battery
- neon test lamp
- pair of long contact points
- this user's guide
Description of the product
WARNING
When inserting the battery, make
sure to follow polarity indicated on
the collar.
Activate/Deactivate the collar
Ø
Activate : as soon as the battery is in place, the collar is ready for use.
To fit the battery in the collar, proceed in the following way :
-
Unscrew the battery cover using a coin.
-
Insert the battery paying attention to follow polarity indicated on the collar (ref. Diagram 1).
-
Retighten the battery cover using a coin. A beep sound is emitted indicating the collar is ready
for use. If you do not hear any beep sound when retightening the battery cover, remove the
battery immediately from its housing. Check the polarity before trying again.
Ø
Deactivate : If you wish to turn Off the collar, you should remove the battery from its housing.
Diagram 1
Battery cover
Contact points
(short or long)
Battery polarity indicator
Gb - 13
Bark detection
contact point