Description Of The Product; Switching Off The Collar; Switching On The Collar; Package Contents - Num'axes CANICALM PREMIUM Manual De Instrucciones

Package contents

Description of the product

- a collar equipped with short contact points
- a 3 Volt CR 2 lithium battery
- a pair of long contact points
Diagram. 1
Setting screw for barking
detection sensitivity

Switching On the collar

Screwdriver
All manuals and user guides at all-guides.com
- Remove the 4 screws from the battery cover.
- Remove the battery cover.

Switching Off the collar

- Insert the 3 Volt CR 2 lithium battery paying attention to the polarity indicated on the battery housing
(See diagram 1).
- Sound beeps are emitted indicating the collar is ready to use.
If you do not hear any sound beep after inserting the battery, immediately remove it from its housing.
Check the polarity before inserting the battery once again.
- Replace the battery cover.
- Retighten moderately the 4 screws.
To switch Off the collar, remove the battery from its housing.
- a neon test lamp
- a screwdriver
- this user's manual
Polarity "-" of the battery
Button to change operating
mode
Polarity "+" of the battery
Gb - 12