Antar AT52304 Manual De Usuario página 12

ENG
INTRODUCTION
Before using your power wheelchair, read and follow the informa on, warnings and cau ons in
this manual. If this manual contains informa on that you do not understand, or if you need further
assistance with assembly or opera on, please contact your dealer.
Following the instruc ons, warnings and cau ons contained in this manual increases the safety of
using the product. The manufacturer shall not be liable for any damage and/or injury resul ng from
improper use of the device or use not in accordance with the instruc ons and warnings contained
herein.
APPLICATION
It is designed for people who cannot or do not want to move independently in a wheelchair using the
strength of their own hands and for those who want to ac vely par cipate in everyday life.
CONTRAINDICATIONS
Physical or mental limita ons (e.g. visual impairment) that prevent safe handling.
CAUTION! Failure to observe the warnings in the opera ng instruc ons may result in personal injury.
ATTENTION: Failure to follow the instruc ons in this manual may result in damage to the electric
wheelchair.
ATTENTION: It is forbidden to use the product other than for its intended purpose!
DESIGN AND OPERATION
The electric wheelchair consists of the following main components (Figure 1): Seat frame: fi ed with
a mechanism that allows the seat to be folded along its axis, thus enabling convenient storage or
transport. Control system: consis ng of a controller, a ba ery compartment, two motors, a set of drive
mechanisms and drive wheels.
The ba ery compartment is located under the seat. There is a 24V, 12AH ba ery with overload
protec on. The ba ery charger socket is located on the rear of the controller.
The drive mechanism is equipped with two manual levers. The levers allow the wheelchair to be
stopped.
Push handles
AT52304 insA6_multi.indd 12 AT52304 insA6_multi.indd 12
armrest
cover
Hand brake
ba ery
Drive wheel
engine
backrest
handle
controller
footrest
1.
- 12 -
2023-12-22 13:27:20 2023-12-22 13:27:20