Ambient Conditions; Design And Function - WIKA TR30 Manual De Instrucciones

3. Specifications / 4. Design and function

Ambient conditions

Ambient and storage temperature
Ingress protection
GB
Response time
6)
Materials
Vibration resistance
6) Measurement in accordance with DIN EN 60751 4.3.3
For further specifications for the TR31 see WIKA data sheet TE 60.31.

4. Design and function

4.1 Description
The models TR30 and TR31 resistance thermometers consist of a thermowell with
fixed process connection, and are screwed directly into the process. They are designed
to be resistant to shock and vibration and all electrical components are protected
against splashed water. The vibration resistance of the standard version complies with
DIN EN 60751 (up to 3 g); specific designs can withstand up to 10 g. The impact resistance
for all versions meets the requirements of DIN EN 60751. The electrical connection is made
via a angular DIN connector, Form A (TR30) or M12 x 1 circular connector (TR30, TR31).
12
-40 ... +85 °C
IP 67 IEC 529 / EN 60529
The stated ingress protection only applies when plugged in using
mating connectors that have the appropriate ingress protection.
t50 < 3.3 s t90 < 9.7 s (for thermowell diameter 6 mm)
Case: stainless steel 1.4571
3 g (DIN EN 60751, standard)
■
20 g (DIN EN 60751, special designs, up to a max. insertion length
■
of 160 mm, no compression fittings)
WIKA operating instructions models TR30, TR31