6. Commissioning, operation
6.1 Mounting
These resistance thermometers are designed for screw-fitting directly into the process.
The insertion length, along with the flow velocity and viscosity of the process media, may
GB
reduce the max. loading on the thermowell.
Installation examples
Insertion length A
6.2 Electrical connection
Output signal Pt100, model TR30-P
■
Angular connector DIN EN 175301-803,
Form A
16
Installation on pipes
a on elbows
b in small pipes, inclined
c perpendicular to flow direction
For information on tapped holes, please
refer to DIN 3852, or ANSI B 1.20 for
NPT threads.
Circular connector M12 x 1, 4-pin
WIKA operating instructions models TR30, TR31