Dremel 6800 Instrucciones De Funcionamiento Y Seguridad página 17

DM 2610010088 02-10:DM 2610010088 02-10 2/26/10 1:02 PM Page 17
Use only Dremel
W RNING
Other accessories are not designed for this tool and may lead to personal injury
or property damage. Router accessories should be 3/4" or less.
The Dremel Trio only accepts 3/16" shank
accessories due to the unique speed of the
tool.
Do not attempt to insert any
W RNING
other collet into the tool.
Attempted use of accessories with other shank
diameters will result in hazardous operation.
Sanding Accessories
TR407 Mandrel
TR408 60 Grit
TR432 120 Grit
TR445 240 Grit
The drum sander, a drum which fits into the tool
and makes it possible to shape wood, smooth
fiberglass, sand inside curves and other difficult
places, and other sanding jobs. You replace the
sanding bands on the drum as they become
worn and lose their grit. Bands come in fine,
medium and coarse grades.
Speed Router Bits
For routing, inlaying, and mortising in wood
and other soft materials.
TR615
Dremel Accessories
®
6800, high-performance accessories with 3/16 shank.
Collets
TR618 TR654
Mandrels
A mandrel is a shank with a threaded or screw
head, which are required when you use
sanding bands. The mandrel is a permanent
shank, allowing you to replace only the worn
head when necessary, thus saving the
expense of replacing the shaft each time.
Multi-Purpose Cutting Bit
TR561 (HSS)
Gives you fast, clean cuts in wood, plywood,
drywall & compositssheet metal and plastic.
Tile Cutting Bit
TR562
Cuts ceramic wall tile, cement board, and
plaster.
Hardwood and sheet metal
TR563 (Carbide)
Gives you fast, clean cuts in wood, plywood,
drywall, sheet metal and hard woods.
17