Descargar Imprimir esta página

BATEC HIBRID 2 Manual De Usuario página 44

Ocultar thumbs Ver también para HIBRID 2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
CAREFUL!
There is a risk that fingers may get smashed in several parts of the product
(openings and spaces bet een fixed accessible parts) during intended use.
( ee fig. 1)
CAREFUL!
There is a risk that feet may get smashed (openings and spaces bet een fixed
accessible parts) during intended use. ( ee fig. 2)
CAREFUL! While using
Hold the handles ith both hands firmly hile driving and make sure the cables
are facing up. Holding the crank arms in a horizontal or up ard position could
a ect the cables.
Cables should never get folded or pinned, as this could damage and cause
them not to ork properly.
When you stop and release the handlebar of the HANDBIKE BATEC HIBRID,
al ays make sure the crank arms are at their lo est point, meaning perpendic-
ular to the ground.
2.3. GENERAL PRECAUTIONS
CAREFUL!
Remember to al ays turn o the BATEC ELECTRIC HANDBIKE before attaching
or detaching it to the wheelchair.
Do not use the BATEC ELECTRIC HANDBIKE if it behaves abnormally or errat-
ically.
Do not use the BATEC ELECTRIC HANDBIKE with dead batteries.
Take your HANDBIKE BATEC HIBRID to a distributor or technical service provider
authorised by BATEC MOBILITY regularly for servicing.
Avoid contact or proximity to fire, particularly lit cigarettes.
If the HANDBIKE BATEC HIBRID is exposed to direct sunlight or lo
tures for an extended period of time, the HANDBIKE BATEC HIBRID pieces may
overheat ( 41 C) or become too cold ( 0 C).
Only use our charger to charge the battery.
– 9 –
tempera-

Publicidad

loading

Productos relacionados para BATEC HIBRID 2

Este manual también es adecuado para:

Hibrid 2 tetraQuad hibrid 2