Eaton TRIPP LITE Serie Manual Del Propietário página 6

Installation
2. Connect a USB Type-C enabled laptop or computer to the unit's USB
Type-C host port using a USB Type-C cable.
3. Connect a 3.5 mm Mini Stereo cable to the back of the unit to connect a
speaker.
4. Connect up to four USB devices to the dock's USB-A hub ports.
5. Connect the adapter's RJ45 port to a network using a UTP cable.
6. Connect the dock's VGA port to the VGA port on a monitor using a VGA
cable.
OR
7. Connect the dock's HDMI port to the HDMI port on a monitor using a
HDMI cable.
OR
8. Connect the dock's DisplayPort port to the DisplayPort port on a monitor
using a DisplayPort cable.
9. Connect a 3.5 mm Mini Stereo cable to the front of the unit to connect a
microphone or headphones.
6