Gigaset SL44 Manual Del Usuario página 51

Gigaset SL44 / IM1 engl / A31008-M1609-R101-1-6Z19 / start_guide_time.fm / 20.08.2004
Setting Walky-Talky mode
The Walky-Talky function allows two hand-
sets to communicate with each other no
matter how far they are from the base.
Example: You go on holiday and take two
handsets with Walky-Talky functionality
with you. Set the Walky-Talky function on
both handsets.
Precondition:
One of the following conditions must
apply.
u
Both handsets are registered to the
same base station.
u
Both handsets are registered to differ-
ent bases and both are set to
(page 6).
u
One of the handsets is not registered to
any base and the registered handset is
set to "Best Base".
u
Neither handset is registered to a base.
Please note:
u
The maximum range between hand-
sets in Walky-Talky mode is 300 metres
outdoors.
u
The handsets cannot be reached by
incoming calls.
u
Handset operating times are severely
shortened in Walky-Talky mode.
u
The Walky-Talky mode is retained even
when you switch your handset off and
back on.
Activating Walky-Talky mode
¢ ¢
v í
Walky-Talky
If, when you are in Walky-Talky mode,
you press the talk key c or the handsfree
key d the call will go to all the handsets
that are in Walky-Talky mode. The connec-
tion is made with the first handset to
answer the Walky-Talky call.
u
The loudspeaker volume and advisory
tones are set in exactly the same way as
if your handsets were in range of the
base (page 18).
u
"Activate/deactivate ringer" (page 21)
and "Activate/deactivate keypad lock"
(page 6) are available in Walky-Talky
mode.
u
To open the menu, press the display
key ©.
Deactivating Walky-Talky mode
§OFF§
Using a handset in Walky-Talky
Best Base
mode as a room monitor
With this function you can use the
Walky Talky function as a room monitor.
The room monitor will then call all the
handsets that are in Walky-Talky mode
as soon as the set noise level is reached
in the room.
During the call, all keys are locked except
the end call key. The room monitor
function remains active after you end the
call. The function must be activated again
if the handset has been switched off.
Note:
– You should always check the operation
of the room monitor before use. Test, for
example, the sensitivity and the connec-
tion.
– The active room monitor function consider-
ably reduces the operating time of the
handset. Place the handset in the charging
cradle if necessary. This ensures that the
battery does not discharge.
– The handset should be positioned 1 to
2 metres away from the baby. The micro-
phone must be directed towards the baby.
– Please note that, as a Walky-Talky function,
the room monitor does not offer absolute
security.
Setting Walky-Talky mode
Press the display key.
15