Publicidad
Idiomas disponibles
Idiomas disponibles
Unless otherwise indicated, the controls have the same functions on the appliance and
on the remote control.
BATTERY RECHARGE
1. With the device switched off, connect the USB type-C socket of the power cable (sup-
plied) to the socket (11) on the device, and the other end to a 5V
with USB socket (not supplied). Connect the power supply to a mains socket.
2. The indicator LED (12) will light up red;
3. When charging is complete, the indicator LED (12) will turn off.
In case of sudden shutdown or abnormal operation of the appliance, proceed with the
complete recharging of the battery.
Note: For a good battery life it is recommended to switch off the device during the recharging.
POWER ON/OFF
-
Turn the On/Off knob to the ON position to turn the product On.
-
Turn the On/Off knob to the OFF position to turn it off.
-
To put the product in Standby mode, briefly press the Standby button on the remote
control and press it again to reactivate it.
VOLUME ADJUSTMENT - MUTE FUNCTION - TONE ADJUSTMENT - EQ
FUNCTION
-
Rotate the volume knob on the device or press the VOL+ and VOL- buttons on the remote
control to adjust the volume.
-
From the remote control, press the MUTE (F) button to mute the unit, press it again to
restore sound.
-
Use the knobs (15) and (17) to adjust the low and high tones.
-
Press the EQ button on the remote several times to choose the equalization among the
various presets available.
RADIO
AUTOMATIC STORAGE STORAGE
1. Press the MODE button (E) several times until the radio frequency appears on the display.
2. Press the
10
(B) button to search and store radio stations automatically; the search/
1A power supply
Publicidad
