Trevi XF 370 KB Manual De Instrucciones página 11

storing will stop when the entire radio band scan is completed. When finished, the first
stored radio station will be played.
RECALL OF THE STORED STATION
To recall the number of a stored station, use the
9
or REW (6) to move to the previous station.
From the remote control use the
Note:
- In radio mode, the LED illumination is automatically switched off to avoid interference.
- FM reception is highly dependent on the location of the device.
The proximity of TV sets, neon lamps or other household appliances may cause inter-
ference in the reception of radio programmes, in which case move the device away.
BLUETOOTH
CONNECTION
1. Turn on the speaker, select the Bluetooth source using the MODE (E) button on the
remote control, and activate the Bluetooth function on the external device;
2. Search for the name "XR 370 KB" from your external device and choose it to perform
the Bluetooth pairing (enter "0000" if requested);
3. Once paired, you can start playback from the external Bluetooth device.
Note: the Bluetooth speaker only works with one connection at a time, the connection
cannot be interrupted during normal operation.
CONTROLS AVAILABLE IN BLUETOOTH MODE
9
- Press the (G) key once to go to the previous track, press the
to the next track.
- During music playback, you can briefly press

the (B) button again to resume playback.
TWS FUNCTION
ACTIVATION (how to associate two XR 370 KB together)
1. Make sure the speakers are not paired with any external Bluetooth devices;
2. Turn on both speakers and select Bluetooth mode;

3. Long press the
confirm the pairing;
4. Once paired, the speakers will automatically pair with each other if turned on at the
same time;
5. To deactivate the TWS function and unpair the speakers, long press the "TWS" button
again on the speaker after pairing.
In order to use the TWS function, the two speakers must have a maximum distance of
about 5 meters from each other in open spaces.
USB/MICRO SD FUNCTION
1. Insert a USB stick/Micro SD card (containing songs in MP3 format) into the slot;
2. After turning on the speaker, playback will start automatically;
3. Press the 9 (G) key to go to the previous track, press the
9 :
(G) or
TWS (7) key on the speaker to start the TWS pairing, a sound will
:
FF (8) buttons to move to the next station
(H) button.

(B) button to pause playback. Press
: (H) key to go to the next track;
:
(H) key once to go
11