Coway APMS-1020A Manual Del Usuario página 22

FILTER REPLACEMENT
Tips
Pre-filter (clean every 2-4 weeks)
1. Hold the upper part of the front cover and pull to open.
2. Push the pre-filter handle to take it out.
3. Remove dust with water or a vacuum cleaner depending on the
degree of contamination.
4. Dry all moisture on the pre-filter before reinstalling it in the purifier.
Put the front cover back on the purifier.
* When installing the pre-filter in the purifier, be sure to attach it exactly
on the hook.
* Wash the pre-filter in running water or water with a neutral detergent
dissolved in it (about 30℃) and then completely dry it in a shady place
with a cross-breeze. If it is dried in direct sunlight or near a dryer, heater,
or other heat-generating items, it may be warped and not work in
the purifier.
21
- Always unplug the power before cleaning the filters.
- The pre-filter can be reused after removing dust and cleaning with water.
- If the pre-filter is not cleaned for a long time, the product performance may
decrease and problems may occur.
- Fine dust filter(Optional), Green Max2 filter cannot be reused after cleaning.
Never clean the other filters with water.