Aluminium utensils
Black or grey
have rubbed against
marks on dishes
dishes
The dishes were not
loaded correctly.
The program was not
powerful enough.
Not enough detergent
was dispensed.
Items are blocking the
The dishes are
movement of the spray
not clean
arms.
The filter combination
is not clean or is not
correctly fitted in the
base of wash cabinet.
This may cause the
spray arm jets to get
blocked.
Detergent left in
Dishes block detergent
dispenser
dispenser
Improper loading
Dishes are removed
too soon
The dishes are
not drying
Wrong program has
been selected.
Use of cutlery with a
low-quality coating.
WARNING
Self-repair or non-professional repair may cause serious risks to the safety of the user
of the appliance and impact warranty.
Use a mild abrasive cleaner to eliminate
those marks.
See "PREPARING AND LOADING
DISHES" on page 24.
Select a more intensive program.
Use more detergent, or change your
detergent.
Rearrange the items so that the spray can
rotate freely.
Clean and/or fit the filter correctly.
Clean the spray arm jets.
Re-loading the dishes properly.
Use gloves if detergent residue can be
found on dishes to avoid skin irritations.
Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can come
out. Take out the dishes until the inside
temperature is safe to touch. Unload the
lower basket first to prevent the dropping
water from the upper basket.
With a short program, the washing
temperature is lower, decreasing cleaning
performance. Choose a program with a
long washing time.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for washing in the dishwasher.
17
EN