Qilive Q.6343 Manual De Instrucciones página 30

10.13. REMOVING THE DISHES
EN
To prevent water dripping from the upper basket onto the dishes in the lower basket,
we recommend that you empty the lower basket first, followed by the upper basket.
WARNING
Items will be hot! To prevent damage, do not take glass and cutlery out of
the dishwasher within around 15 minutes after the program has ended.
11. ERROR CODES
If there is a malfunction, the dishwasher will display an error code. The following table
shows possible error codes and their causes.
Meanings
Codes
E1 Longer inlet time.
Not reaching required
E3
temperature.
E4 Overflow.
E8 Shunt valve failure
Failure of communication
Ed between main circuit board
and display circuit board.
WARNING
• If overflow occurs, turn off the main water supply before calling a service.
• If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
• If there is an error code that cannot be solved, please request professional
assistance.
12. USAGE COUNTER
When the power cord is connected, but the dishwasher is not turned on, press and hold
the Delay button "+" for 5 seconds, the dishwasher display will show the usage count.
Example:
For "632": First it displays "000" for 2 seconds, then "632" for 2 seconds, at last it will
be off.
For "9080": First it displays "009" for 2 seconds, then "080" for 2 seconds, at last it will
be off.
+
5 s
Possible Cause
Tap is not turned on, or water intake is
restricted, or water pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
The shunt valve can not reach the
required position.
Open circuit or broken wiring.
+
for "632"
30
+
for "9080"