geberit ACO 203 Manual De Operación página 25

Item no. Designation
6 Pressing attachment
7 White LEDs
8 Retaining pin
9 Warning note sticker
10 Roller drive
11 Release button
Radio interface
12
symbol
13 Compatibility mark
14 Charge level indicator Shows the capacity of the rechargeable battery.
15 Release button
16 Rechargeable battery
17 Specification plate
1)
The Bluetooth® brand and its logos are the property of Bluetooth SIG, Inc. and are used
under license by Geberit.
Radio interface function
The pressing tools with the type designation "plus" are equipped with a Bluetooth® radio
interface. When used together with a mobile end device (iOS or Android) and the NovoCheck-
App (www.novopress.de), the following functions are available:
• reading out data, such as the number of pressing operations, tool status, serial number
• checking the tool electronics
• setting the pressing point light (if available) and the time until the idle state
• creating construction site reports
To establish a connection between the pressing tool and an end device, the pressing tool must
be ready for operation (tap the start button, green LED lights up, blue LED flashes) and the
NovoCheck-App must be installed on the end device. The blue LED lights up when the
Bluetooth® connection is successfully established.
The blue LED goes out if it was not possible to establish a connection to the end device before
the first pressing operation. The pressing tool must be completely switched off and on again
before establishing a connection can be reattempted. The rechargeable battery must also be
removed briefly.
90071994442300555 © 12-2023
968.361.00.0(03)
Function/description
• The pressing jaw or pressing collar with adapter jaw
corresponds to the diameter of the pressfitting.
• Pressing attachment with warning note sticker.
Two LEDs for pressing point light.
Holds the pressing attachment in place
• Warning sign: hazard from flying fragments.
• Safety note: read the operating instructions before
commissioning and using the tool.
Transfers the pressing force from the pressing tool to the
pressing attachment.
Press and hold: interrupts the pressing procedure; roller
drive returns to its starting position.
1)
Bluetooth® radio interface (ACO 203plus pressing tool
only).
Pressing attachments that carry this symbol are compatible
with the pressing tool.
Push in both release buttons: rechargeable battery can be
pulled out.
Only use Geberit lithium-ion batteries of type
Milwaukee 18 V.
–
EN
2 / 2
25