Publicidad
Idiomas disponibles
Idiomas disponibles
Dear Costumer, thanks for choosing this Atlas Filtri
EN
1. GENERAL INFORMATION
The indications in this manual apply to models:
NEXT 50 - NEXT 100 - NEXT 130
NEXT is a device intended to process drinking water able to modify its organoleptic and chemical properties, reducing the saline content while guaranteeing
microbiological safety. Correct use and maintenance permit the reduction of most pollutants such as insecticides, pesticides, fertilisers, hazardous organic substances,
heavy metals, pathogen micro-organisms.
1.1 CONDITIONS OF USE
- NEXT is not a drinking water maker. Do not use for uses intended for drinking water in the event of originally non-drinking water or of unknown quality.
- Perform periodic routine maintenance to guarantee processed water meets drinking requirements and maintain the stated performance levels.
- In the event of prolonged disuse, remove the cartridges and membranes and, when reused, insert new ones. After servicing, let the water run for at least 5 minutes
before using it.
- At the end of the NEXT device working life and relevant cartridges and membranes, discard according to current local law.
2 - TECHNICAL CHARACTERISTICS
WORKING CONDITIONS
Electrical Power Supply: 220VAC - 50Hz
Maximum Power: 115W
Fuse: 1.6A T
Weight [Kg]: 7.5
Min/Max Supply Pressure [Bar]: 0.5 / 5
Min/Max Water Temperature [°C]: 5 / 35
Max Permitted Chlorine [ppm]: 0.2
Max Permitted Iron [ppm]: 0.1
Max Permitted Manganese [ppm]: 0.1
Max Salinity [μs/cm]: 1500
Min/Max Ambient Temperature [°C]: 5 / 40
Max Relative Humidity [%]: 95
*Nominal performance values are average values obtained under standard test conditions: water with NaCl at 25°C, 7.5 bar and 500TDS. Actual values may differ widely
according to actual conditions on site and wear. For example, at 15°C, production may decrease by about 30% as compared to nominal values.
2.1 - COVER CHARACTERISTICS
This highly technological cover was designed to make routine and extraordinary maintenance easier and safer.
10
®
product.
MODEL
PRODUCTION
50
100
130
ANTI-FLOODING
The anti-flooding
device to detect leaks.
RELEASE CAMS
Rotating at 90°, the cams
quickly release or lock the
vessel unit
OPENING/CLOSING
SCREW
Long pitch screws
that allow quick
opening/closing the
machine.
POSITIONABLE LCD
The LCD panel installed on the
machine can be installed in any
position and it can be rotated to
always have the best view
NOMINAL PERFORMANCE*
RECOVERY RATE
50 L/h
59%
100 L/h
54%
130 L/h
50%
REJECTION
92%
92%
92%
Publicidad
