Descargar Imprimir esta página

SPIDO ECC 150 Instrucciones Para El Manejo página 11

Bomba sumergida de agua sucia

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
Dear customer,
Congratulation for buying your new device from SPIDO!
Like all our products, this one, too, was developed using the latest technological knowledge. The device was
manufactured and assembled on the basis of state-of-the-art pump technology using most reliable electrical or
electronic components which ensure a high level of quality and a long life of your new product.
Please read through these operating instructions carefully to make sure that you can fully benefit from all features.
Some explanatory illustrations can be found at the end of these operating instructions.
We hope you will enjoy your new device!
Table of contents
1.
General safety information
2.
Range of use
3.
Technical Data
4.
Scope of delivery
5.
Installation
6.
Electrical conection
7.
Putting into operation
8.
Maintenance and troubleshooting
9.
Warranty
10.
How to order spare parts
11.
Service
1.
General safety information
Persons not conversant with the contents of these operating instructions must not use this
device.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
The pump must not be used when people are in the water.
The pump must be supplied through a residual current device (RCD) having a rated residual
operating current not exceeding 30mA.
The mains power connection of this device cannot be replaced. In case the line is damaged,
the device must be scrapped.
Disconnect the device from the power supply and let it cool down before cleaning and
maintenance is performed and before the device is stored.
Notes and instructions with the following symbols require particular attention:
Any nonobservance of these instructions involves the danger of bodily harm to people and/or
damage to property.
Any nonobservance of this instruction bears the risk of an electrical shock which may cause
damage to persons or property.
Please inspect the device for damage occurred during transportation. In case of damage, the retailer has to be
informed immediately, at the latest within 8 days after the date of purchase.
2.
Range of use
Submersible dirty water pumps from SPIDO are highly efficient electrical pumps for discharging clear or dirty
water containing solids up to the maximum size specified in the technical details. These high-quality products with
their convincing performance data were developed for the multiple purposes involved with draining and pumping
liquids from one place to another.
The typical ranges of application of submersible dirty water pumps include: draining of ponds, basins, storage
containers, dirty water and biological pitches as well as emergency draining required following flooding or
inundation.
As a special benefit, this pump is suitable for continuous operation - therefore it is also suitable for recirculating
water in ponds or for profiling water courses. Especially in view of its use in ponds, this product is equipped with a
GB

Publicidad

loading