Schumacher Electric SC-200A-CA Manual Del Usuario página 12

PROBLEM
Charger will not turn
on when connected
to a battery.
I cannot select a 6V
or 12V setting.
15. BEFORE RETURNING FOR REPAIRS
or call 1-800-621-5485, Monday-Friday 7:00
For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE
AUTHORIZATION (RMA) number from Customer Service at Schumacher
Electric Corporation.
POSSIBLE CAUSE
AC outlet is dead.
Poor electrical connection.
Connections are reversed.
Battery is defective.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
For information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
Check for open fuse or
circuit breaker supplying
AC outlet.
Check power cord and
extension cord for loose
fitting plug.
Unplug the charger and
reverse the clamps. (The
charger will not detect
reversed connections when
the battery voltage is less
than 2V.)
Have battery checked.
No problem; this is normal.
• 12 •
REASON/SOLUTION
to 5:00 CST
am pm