Publicidad
Idiomas disponibles
Idiomas disponibles
9.
ASSEMBLY INSTRUCTIONS
9.1
Remove all cord wraps and uncoil the cables prior to using the battery charger.
10. FEATURES
4
11. CONTROL PANEL
LED DISPLAY
REVERSED (red) LED flashing: The connections are reversed.
CHARGING (yellow/orange) LED lit: The charger is charging
the battery.
CHARGING (yellow/orange) LED flashing: The charger is in
abort mode.
CHARGED (green) LED pulsing: The battery is fully charged
and the charger is in maintain mode.
NOTE: See the Operating Instructions section for a complete description of
the charger modes.
12. OPERATING INSTRUCTIONS
IMPORTANT: Do not start the vehicle with the charger connected to the AC
outlet, or it may damage the charger and your vehicle.
NOTE: This charger is equipped with an auto-start feature. Current will not
be supplied to the battery clamps until a battery is properly connected. The
clamps will not spark if touched together.
CHARGING A BATTERY IN THE VEHICLE
1. Turn off all the vehicle's accessories.
2. Keep the hood open.
3. Clean the battery terminals.
4. Place the charger on a dry, non-flammable surface.
2
1
3
• 8 •
1. Ring connectors (quick-connect)
2. 12V Accessory plug (quick-connect)
3. Battery status LEDs
4. Battery clamps (quick-connect)
Publicidad
