Klarstein MIDNIGHT SUN Manual Del Usuario página 39

SET DESCRIPTION AND GENERAL FUNCTIONS
Each set consists of two parts:
• A remote control with digital display, which houses the electronics, the
controls and the built-in room temperature sensor.
• A socket receiver that can receive and decode the signal from the remote
control.
Remote control functions
The remote control uses its integrated sensor to detect the room temperature
and sends a signal to the socket receiver to switch the heater on and off when the
ambient temperature changes, thus maintaining a constant room temperature.
• If the room temperature is 0.5 °C higher than the target temperature, the
remote control sends an OFF command to the receiver. The heater is switched
off.
• If the room temperature is 0.5 °C lower than the target temperature, the
remote control sends an ON command to the receiver. The heater is switched
on.
The display of the remote control shows the set temperature, the measured
temperature, time, date, modes and various other values. With the remote control
you can program the week, set the auto OFF timer and many other functions.
Note: The remote control is powered by two 1.5 V AA batteries. Please replace
the batteries as soon as the battery symbol flashes, otherwise the remote
control will no longer be able to control the heater.
The remote control has a lock function (parental lock) which ensures that children
cannot change the heater settings.
When the LCD screen is switched off, only the receiver (heater) is switched off; the
remote control itself is still in operating mode until the batteries are empty. The
LCD screen of the remote control only works within an ambient temperature of
1-50 °C.
EN
39