Klarstein MIDNIGHT SUN Manual Del Usuario página 45

Programming mode 1...7
In this mode, you can program 2 heating intervals for each individual day of the
week.
1 In mode 1...7, press and hold the SET key for 3-5 seconds until the program
icon (1) and MON are displayed while ON and the time icon flash on the
screen.
2
Press the key to set the hours of the the start time of program (1) in 1-hour
increments. Press the
5-minute increments.
3 Press the SET key once and the OFF symbol flashes on the screen. Use the
key to set the hour of the end time of program (1). Press the
the minute of the end time of program (1).
4 Press the SET key again and the symbol for the set temperature flashes
on the screen. Use the
maintained for program (1).
5
Press the SET key again to call up and program the program (2). Repeat
steps 2-5 to program the two heating intervals for each individual day of
the week.
6 Finally, press the SET key again to save the settings.
key to set the minute the start time of program (1) in
or key to set the desired temperature to be
key to set
EN
45