• The average duration provided for compressor ranges is: F400: 400 hours, F700: 700 hours, F1000:
1000 hours, F2000: 2000 hours.
• Repairs must be performed by authorized personnel only. Any unauthorized repairs will void the
warranty and may pose a safety hazard for the user.
WARNING: Do not modify this equipement without authorization of the manufacturer
• The Manufacturer, the Retailer and the Importer are responsible for the safety, reliability and
performance of the device only if: a) the device is used in accordance with the operating instructions
b) the electrical system of the premises where the device is used is in compliance with current laws.
• Interactions: The materials used that come into contact with medications have been tested with a
wide range of medications. However, due to the variety and continuous evolution of medication,
the possibility of a chemical interaction cannot be excluded. We recommend that once the
medication has been opened you should use it as soon as possible and avoid prolonged contact of
the medication with the nebulizer.
• The manufacturer should be contacted for reporting problems and/or unexpected events related to
device operation.
INSTRUCTIONS FOR USE
Before each use, the nebuliser and accessories should be cleaned according to the instructions in
the section "CLEANING, SANITIZATION, DISINFECTION AND STERILIZATION" A personal use of the
nebuliser and its accessories is recommended in order to avoid any risks of infection.
1. Insert the power cord (A7) into a power socket corresponding to the voltage of the device. This must
be positioned so that it is not difficult to make the disconnection from the mains.
2. Open the nebuliser by turning the upper part (C6.1) anticlockwise.
3. Pour the drug prescribed by the physician into the lower part (C6.3). Close the nebuliser by turning
the upper part (C6.1) clockwise.
If you use the face mask, fit it to the
face as shown in the picture.
HOw TO USE RF6 PLUS NEBULISER wITH DOUBLE ACTION vALvE
It is professional, quick and suitable for administering all types of drugs, including more costly ones,
also in patients with chronic diseases. The configuration of the internal lines of the RF6 PLUS nebuliser
ensures the ideal granulometry providing effective treatment right down to the lower airways.
USE wITH MOUTHPIECE
Use the double action valve (C6.4) in position
1. In this case the inhalation therapy allows
the maximum drug intake and therefore the
maximum therapeutic effect, minimising the loss
of medication.
USE OF NEBULISATION MANUAL CONTROL
To achieve continuous nebulisation action you should not use the manual nebulisation control (C5),
especially in the case of children or persons with reduced physical, sensory, or mental capabilities. The manual
nebulisation control is useful for limiting dispersion of the medication in the surrounding environment.
4. Connect the accessories as shown in the "Assembly diagram".
Sit comfortably, holding the nebulose in your hands, place the
mouthpiece over your mouth or use the nasal prong or mask.
5. Start the unit by means of switch (A1) and breathe in and out deeply.
6. W hen the treatment is finished, turn off and unplug the unit.
7. It may happen that after a treatment session visible humidity
deposits form in the tube (B): disconnect the tube from the nebuliser
and let it dry using the compressor air flow, as this prevents mould
from growing in the tube.
VALVE IN
POSITION 1
2
USE wITH MASK AND NASAL PRONG
To make inhalation therapy faster we recommend
using the double action valve (C6.4) in position 2.
To administer the medication only through the
nose, use the non-invasive nasal prong (C4).
VALVE IN
POSITION 2