Supercook SC400 Manual Del Usuario página 11

Getting Started
Yumi 3.0 Tablet
1. PLease charge teh Yumi 3.0 Tablet with the supplied power adaptor.
2. Turn on the Yumi 3.0 tablet and open the SUPERCOOK SMART application. If you are already a Supercook member,
you can use your existing login details. If not, register and follow the steps in the application.
3. Familiarize yourself with the Supercook as described in the operating instructions, observe the
safety instructions..
4. Turn on the Supercook and connect the Yumi 3.0 tablet to the Supercook..
Connect the Yumi 3.0 tablet to the Supercook
1. In the application, click the Profile icon..
2. Click on MY SUPERCOOK, add your serial number and then connect the Supercook.
Follow the steps in the application. The Supercook is connected as soon as button 1 is blue
illuminated
Profil
18
Manual_SC400_2021_07.indd 18-19 Manual_SC400_2021_07.indd 18-19
MY SUPERCOOK
Preparation
Jar
1. The jar has a volume of 4.5 litres and has a handy measuring scale on the inside and
outside.
2. Once the knife has been properly fitted in the jar, place the jar in the recess on the kitchen
machine. Then gently press it down until the jar engages with the gear drive and contacts.
1. Do not fill the jar above the maximum level. Otherwise, safe operation cannot be
guaranteed and the quality of your finished dishes may be compromised.
2. When you remove the jar from the kitchen machine, make sure you do not spill any of the
contents. If the contents are hot, you could scald yourself.
3. If the jar does not engage with the drive on the kitchen machine immediately, carefully turn
the knife head.
Knife
1. The knife is fitted in the jar on delivery.
2. In order to remove the knife, put the jar in a vertical position. Push the lever down
anticlockwise to release the knife. (see Figure 1)
3. In order to insert the knife, move it into position and push the lever upwards clockwise.
(see Figure 2)
1. The knife is very sharp! Be very careful when fitting and removing it.
2. Make sure that the sealing ring is properly seated on the knife bearing. If the sealing ring is
not fitted, the content of the jar can leak out and damage the kitchen machine.
3. When adding food, make sure that it does not block the knife.
4. Allow the knife to cool down completely after each cooking process before removing it.
5. The maximum processing amount is 500 g flour in a firm bread dough.
Fig. 1
Fig. 2
Cooking basket
1. The cooking basket is used for steaming small quantities of food and is fitted directly
into the jar.
2. There is an inset to the side which makes it easy to remove the cooking basket with
the aid of the spatula.
D
GB
FR
ES
IT
PT
NL
RUS
AR
HE
TR
NO
19
7/8/21 9:23 AM 7/8/21 9:23 AM