Dentsply Sirona X-Smart IQ Manual De Usuario página 41

Step by Step Instructions
To revert to the factory settings of the reference point, deactivate the function in the
Propex IQ
The Shaping Target function can only be used in connected mode. If Propex IQ
Locator is disconnected, the location of the reference point reverts to factory settings. If
the disconnection was involuntary, the customized settings are retained for 5 minutes.
Propex IQ
Four sound levels can be selected:
• level 0: off;
• level 1: low;
• level 2: medium, default setting;
• level 3: loud.
END-IFU-ENDO-IQ-APP-V07-WEB-EUR-Multilingual-2020-12
®
Apex Locator parameters.
®
Apex Locator volume
®
Apex
41/58