Publicidad
Idiomas disponibles
Idiomas disponibles
How to attach R.A. Edit button labels
m Affix the provided labels @ and
along the slit
8 R.A. Edit function button labels
beside the editing control buttons.
Note: Depending on the camcorder/VCR
used, the R.A. Edit function terminal may be
labeled EDIT, R.A. EDIT, etc. Also, some
models may be connected via AV jacks. Be
sure to check the instruction manual of the
camcorder/VCR
used
before
making
g To REMOTE jack
connections.
of JX-ED11
= Camcorder/
VCR having
R.A. Edit
function
= Repeat steps J and Ei to continue editing required scenes.
ya | To change a cut-in/out point, press CANCEL (OUT)
button @.
@ The counter readout at the cut-in or out point will go
out.
After creating the editing program, set the recording
VCR to play mode, then press VCR REC STBY (EDIT
STOP) button @.
@ Recording VCR enters the record-pause mode.
i)
6
Press EDIT START (EDIT CHECK) button @.
@ Both playback and recording VCRs start operation
for automatic editing.
145
Publicidad
