Hitachi C 10FCD Manual De Instrucciones E Instrucciones De Seguridad página 18

Sierra compuesta
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Type of
Cro w n M olding
45° Type
38° Type
(1) Setting to cut cro w n m oldings at positions q and r in Fig. 25 (see Fig. 26):
q Turn the table to the right and set the Miter A ngle as follo ws:
* For 45° type cro w n m oldings: 35.3°
* For 38° type cro w n m oldings: 31.6°
w Tilt the head to the left and set the Bevel A ngle as follo ws:
* For 45° type cro w n m oldings: 30°
* For 38° type cro w n m oldings: 33.9° ( m ark)
e Position the cro w n m olding so that the upper surface (A in Fig. 24) contacts the fence as indicated
in Fig. 27.
(2) Setting to cut cro w n m oldings at positions w and e in Fig. 25 (see Fig. 28):
q Turn the table to the left and set the Miter A ngle as follo ws:
* For 45° type cro w n m oldings: 35.3°
* For 38° type cro w n m oldings: 31.6°
w Tilt the head to the left and set the Bevel A ngle as follo ws:
* For 45° type cro w n m oldings: 30°
* For 38° type cro w n m oldings: 33.9° ( m ark)
e Position the cro w n m olding so that the lo w er surface (B in Fig. 24) contacts the fence as in Fig.
29.
q
Table
Miter A ngle Scale
Fence
A
(3) Setting to cut cro w n m oldings at positions q and r in Fig. 25 (see Fig. 30):
q Turn the table to the right and set the Miter A ngle as follo ws:
* For 45° type cro w n m oldings: 35.3°
* For 38° type cro w n m oldings: 31.6°
w Tilt the head to the right and set the Bevel A ngle as follo ws:
* For 45° type cro w n m oldings: 30°
* For 38° type cro w n m oldings: 33.9° ( m ark)
e Position the cro w n m olding so that the upper surface (B in Fig. 24) contacts the fence as indicated
in Fig. 31.
18
To process cro w n m olding at
positions 1 and 4 in Fig. 25.
Miter A ngle
Bevel A ngle
Setting
Setting
right 35.3°
left 30°
right 31.6°
left 33.9°
( m ark)
Head
Bevel
A ngle Scale
r
Fence
Base
Fig. 26
B
Table on Base
Fig. 27
To process cro w n m olding at
positions 2 and 3 in Fig. 25.
Miter A ngle
Setting
right 30°
left 35.3°
right 33.9°
left 31.6°
( m ark)
w
Fence
Base
Fig. 28
Fence
B
Table on Base
Fig. 29
Bevel A ngle
Setting
left 30°
right 30°
left 33.9°
right 33.9°
( m ark)
( m ark)
Head
Bevel
A ngle Scale
e
Miter A ngle Scale
Table
A

Publicidad

Tabla de contenido
loading

Tabla de contenido