Xylem SI Analytics AVS 370 Manual De Instrucciones página 34

34
Deployable hose combinations
2.2.2
Hose combinations
Type no.
VZ 5505
VZ 5505 + VZ 8526
VZ 8523
VZ 8524
VZ 7218 + VZ 8535
VZ 8530
VZ 5606
The hose combinations are to be selected on the basis of the required application.
When using Micro Ubbelohde viscometers with TV sensors, the ignition temperature of the
media to be measured has to be taken into account! It has to be higher than 250°C.
Description
Silicone hose kit, oppressive, for
Ubbelohde viscometers (3 legs), and
Cannon-Fenske and Ostwald viscometers
Silicone hose kit, suctioning, for
Ubbelohde viscometers (3 legs)
PTFE hose set, suction, for Ubbelohde
viscometer (3 legs)
PTFE hose kit, suctioning, with soda lime
filter VZ 7215 for Ubbelohde viscometers
(3 legs)
PTFE hose kit, suctioning, for Ubbelohde
viscometers (4 legs)
PTFE hose kit, suctioning, with soda lime
filter VZ 7215 for Ubbelohde viscometers
(4 legs)
For TC viscometers (3 and 4 legs) with
screw connections: Silicone hose fittings
with connecting cable. For oppressive
operation
Application
Standard, but please observe: the sample
can leak from the capillary tube during a
malfunction
Standard, safer than oppressive operation,
as the sample cannot leak from the
capillary tube.
Unsuitable for volatile samples.
For aggressive samples that attack
silicone, such as sulphuric acid. Hose
lengths are designed to fit the AVS
on the support console VZ 8571.
All hose sets for suctioning operation can
be combined with the suction set and the
sample fill set.
For aggressive samples whose vapors are
absorbed by soda lime filters to protect the
ViscoPump. Depending on the sample, an
active carbon filter VZ 7216 can be used
instead of the soda lime filter VZ 7215.
Hose lengths are designed to fit the
®
AVS 370 on the support console
VZ 8571.
For Ubbelohde viscometers with additional
th
4 pipe for filling and cleaning Hose
lengths are designed to fit the AVS
on the support console VZ 8571.
For Ubbelohde viscometers with additional
th
4 pipe for filling and cleaning Hose
lengths are designed to fit the AVS
on the support console VZ 8571. For
aggressive samples whose vapors are
absorbed by soda lime filters to protect the
ViscoPump.
For TC viscometers (3 and 4 legs) with 4
pipe for filling and cleaning Typical
applications are measurements of oils.
®
370
®
370
®
370
th