Publicidad
Idiomas disponibles
Idiomas disponibles
Menu item
IPOD SWITCH *
8
AM *
9
F-AUX *
9
R-AUX *
9
*
8
Displayed only when "USB-IPOD" is selected as the source.
9
*
Displayed only when any source other than "AM/F-AUX/R-AUX/BT AUDIO" is selected separately.
Troubleshooting
Symptom
Sound cannot be heard from the
speakers.
"MISWIRING CHK WIRING THEN RESET
UNIT" / "WARNING CHK WIRING THEN
RESET UNIT" appears on the display and
no operations can be done.
The unit does not work at all.
"F-AUX" or "R-AUX" cannot be selected. Check the <SRC SELECT> = <F-AUX / R-AUX> setting. (See
Sound is sometimes interrupted while
listening to an external component
connected to the auxiliary input jack.
The correct characters are not displayed
(e.g. album name).
SSM automatic presetting does not work. Store stations manually.
Static noise while listening to the radio.
"AM" cannot be selected.
Sound quality changes when receiving
HD Radio stations.
Selectable setting, [Initial: Underlined]
HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls
iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions
(musics, games, applications, etc.) running on the connected iPod/iPhone is emitted
through the speakers connected to this unit. The display always show "EXT MODE."
ON / OFF : Enable or disable "AM" in source selection.
ON / OFF : Enable or disable "F-AUX" in source selection.
ON / OFF : Enable or disable "R-AUX" in source selection. / BT ADAPTER : Selects if
the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 12)
The source name changed to "BT AUDIO."
Adjust the volume to the optimum level. / Make sure the unit is not
muted/paused. (page 6) / Check the cords and connections.
Check to be sure the terminals of the speaker leads are covered
with insulating tape properly, then reset the unit. (page 3)
If the message does not disappear, consult your JVC car audio
dealer or a company supplying kits.
Reset the unit. (page 3)
above.)
Check to be sure the recommended stereo mini plug is used for
connection. (page 12)
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
Connect the antenna firmly.
Check the <SRC SELECT> = <AM> setting. (See above.)
Fix the reception mode either to < ANALOG / DIGITAL>. (page 8)
Remedy/Cause
Continued...
ENGLISH
19
Publicidad
