Publicidad
Idiomas disponibles
Idiomas disponibles
DS 62190
BLUE
YELLOW/GREEN
THE CLASS 2 HOOD MUST NOT BE EARTHED
Second class hoods with the characteristics label containing the double square symbol.
The connection should be made as follows;
BROWN
BLUE
NOTICE OF INSTALLATION
• Before installation, please ensure the area is clean to avoid suction of the remaining bits of broken wood
and dust.
• It cannot share the same air ventilation tube with other appliance such as gas tube, warmer tube, and
hot wind tube.
• The bending of ventilation tube should be≥120°, parallel or above the start point and should be
connected to the external wall.
• After installation, make sure that the extractor is level to avoid grease collection at one end.
USE
1. Press the "Power" button, the button control the "on" & "off " of the hood.
2. Keep pressing the buttom "Speed", the motor runs as low / mid / high / low / mid..., the speed runs
circularly; and the LED display will indicate as 1-2-3-1-2... circularly.
3. Press "Light" button, the light is on, press this button again, the light is off, keep pressing this button,
the lights are on/off circularly.
4. When the hood is working, if press the "Timer" button, the hood will go into the status of acquiescent
working (acquiescent time is 9mins), and then, the LED display will indicate as "9-8-7...-1-0", when
indicate "0", the hood will be off automatically. If keep pressing "Timer" button, the hood will go in or
go out "Timer" function.
=
N (neutral)
=
Earth
=
L (live)
=
N (neutral)
RIGHT
Speed adjustment .See pictures
LED Touch button
WRONG
14
Publicidad
