Helo Elite Instalación Y Manual De Uso página 38

Installation and User Manual Himalaya Elite
2.9. Sauna heater safety clearances
Output
kW
6.8
10.5
Corner and wall installations: The OLET 31 sensor is installed 40 mm from the ceiling on the centre line of the heater on a
wall. Alternatively, the sensor can be installed on the ceiling above the centre of the heater – see 'middle installation' for instruc-
tions. The heater must be secured to the floor or the sauna bench structure in order to keep the safety distances the same.
OLET 31
A
Wall support
Heater mounting
point to wall or
sauna bench
Middle installation: If the sauna heater is installed further than 60 mm off a wall or a corner, the installation method is always
middle installation. The heater must be attached to the benches or to a similar structure using a wall support. The OLET 31
sensor is always installed on the ceiling.
A
Figure 2 Safety clearances
Sauna room
Volume Height
min. max.
m³ m³ min. mm
5 9 1900
9 15 1900
Table 1 Safety clearances
330 D
mm
F
870
A
H
1900
Wall support
Heater mounting
point to wall or sauna
bench
Heater minimum clearances
From side
to wall From front to
sauna bench
A D
mm mm
60 60
60 60
OLET 31
A
Wall support
Heater mounting
point to wall or
sauna bench
Amount of
stones
To ceiling
mm In kg, approx.
870 100
870 100
Absolute measure,
when the sensor
OLET 31 installed on
the wall.
Water tank
330
OLET 31 sensor
position in a ceiling
installation above the
heater within the
330 mm diameter.
7