Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Problem
Light fails to get lit
Doors cannot be properly
closed
Loud noise
Door seal fails to be tight
Water pan overflows
Hot housing
Surface condensation
Abnormal noise
Table 1 Climate classes
Class
Extended temperate
Temperate
Subtropical
Tropical
Solution
• Check whether the refrigerator is connected to power supply
and whether the illuminating light is damaged
• Have the light replaced by a specialist
• The door is stuck by food packages
• Too much food is placed
• The refrigerator is tilted
• Check whether the floor is level and whether the refrigerator
is placed stably
• Check whether accessories are placed at proper locations
• Remove foreign matters on the door seal
• Heat the door seal and then cool it for restoration (or blow
it with an electrical drier or use a hot towel for heating)
• There is too much food in the chamber or food stored
contains too much water, resulting in heavy defrosting
• The doors are not closed properly, resulting in frosting due
to entry of air and increased water due to defrosting
• Heat dissipation of the built-in condenser via the housing,
which is normal
• When housing becomes hot due to high ambient temperature,
storage of tpp much food or shutdown of the compressor
is shut down, provide sound ventilation to facilitate heat
dissipation
• Condensation on the exterior surface and door seals of the
refrigerator si normal when the ambient humidity is too
high. Just wipe the condensate with a clean towel.
• Buzz: The compressor may produce buzzes during operation,
and the buzzes are loud particularly upon start or stop. This
is normal.
• Creak: Refrigerant flowing inside of the appliance may
produce creak, which is normal.
Symbol
SN
N
ST
T
15
EN
Ambient temperature range
+ 10 to + 32
+ 16 to + 32
+ 16 to + 38
+ 16 to + 43
Publicidad
