Taurus VERONA 6 INOX Instrucciones De Uso página 6

EN English (Original instructions)
DRIP COFFEE-MAKER
VERONA 6 INOX, VERONA 12 INOX
DESCRIPTION
A Supply cord
B Heating plate
C Water tank
D Water tank lid
E Filter holder
F Permanent filter
G Jar
H On/off button with pilot light
I Measuring spoon
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance without its filters correctly in
place.
• Do not switch the appliance on without water.
• Do not use the appliance if the on/off button does not
work.
• Do not move the appliance while in use.
• Do not use the appliance if it is tipped up, and do not turn
it over.
• Do not turn the appliance over while it is in use or
connected to the mains.
• Respect the MAX level indicator.
• Disconnect the appliance from the mains when not in use
and before undertaking any cleaning task.
• Unplug the appliance from the mains before refilling the
water tank.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Do not store the appliance if it is still hot.
• Only use water with the appliance.
• Never leave the appliance connected and unattended if
it is not in use. This saves energy and prolongs the life of
the appliance.
• CAUTION: Do not use the appliance if the glass is
cracked or broken.
• CAUTION: Water condensation may appear on the
surfaces and objects around this appliance.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all products' packaging has been
removed.
• Please read carefully the «Safety advice and warnings»
section before first use.
• Before using the product for the first time, we recommend
running it just with water.
• Before using the product for the first time, clean the parts
that will come into contact with coffee and water in the
manner described in the «Cleaning» section.
FILLING WITH WATER
• You must fill the water tank before turning on the
appliance.
• Open the lid.
• Fill the compartment with cold water.
• Fill the compartment with as many cups of water as cups
of coffee you would like to make.
• Close the lid.
FILLING WITH COFFEE
• Open the lid of the filter holder.
• Remove the filter holder.
• Fill the permanent filter with ground coffee (use 6-7 grams
for each cup to be made).
• Check that the permanent filter is correctly placed in the
filter holder.
• Reinstall the filter holder in the appliance.
• You can use the measuring spoon to add coffee.
USE
• Follow the procedures for «Filling with water» and «Filling
with coffee».
• Extend the supply cord completely before plugging it in.
• Place the jar on the heating plate.
• Connect the appliance to the mains.
• Turn the appliance on by using the on/off button.
• The pilot light comes on.
• The jar can be removed while the coffee is being made.
The anti-drip system prevents the coffee from spilling
when the jar is not in its position. However, if the jar is
kept out of its position for over 30 seconds before all
the water has passed through the filter, the filter may
overflow.
• If you want to keep the coffee hot, place the jar on the
heating plate without switching off the coffee maker.