Connecting an External Equipment
Connect signal cords (not supplied) between the System's LINE IN/OUT terminals and the output/input terminals of the ex-
ternal MD recorder, tape deck, etc. (For the details of connection, please refer to the user's manual of the external equipment.)
You can then listen to the external source through the System or record the System's CD player or tuner to the external unit.
Connecting an MD Recorder, etc (Optical Digital Output)
Unplug the cap and connect an optical digital cord (not supplied) between the System's OPTICAL DIGITAL OUT terminal
and the input terminal of the MD recorder, etc.
You can record the digital output signal from the System's CD Player to the MD recorder, etc.
COMPU PLAY
JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, turn on the radio, or listen to an external equipment with a single press of the
play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If
the System is not ready (no CD in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Remote Control
CD 3/8 button
FM/AM button
LINE button
Automatic Power On
The System automatically turns on with the following operation.
• When you press the 0 CD button on the Unit or the CD DOOR 0 button on the Remote Control, the System automatically
turns on and the CD door opens to allow CD setting. However, this operation does not change the source to CD.
When you press the STANDBY/ON
opened.
Signal cord
(not supplied)
STEREO mini plug
STEREO mini plug
Signal cord
(not supplied)
Cap
button to turn off the System, the CD door will be automatically closed if it is
Pin-plug x 2
MD recorder or tape deck
(not supplied)
Pin-plug x 2
Optical digital cord
(not supplied)
MD recorder, etc.
(not supplied)
Getting Started
8