Linea 2000 DOMO DO7298S Manual De Instrucciones página 81

· It is recommended that fireplaces and certain areas (e.g. ventilation floor grilles) where the robot
could be damaged be cordoned off, set as a no-go zone, or set up as a virtual wall in the app.
· Do not walk near the working robot. The robot could recognise you as an obstacle and skip places
when vacuuming.
NOTE:
The robot vacuum can also be used with the charging station DO7296S-32 (not included – available in the
DOMO webshop), which can be placed in another space or on another floor. As a result, you don't always
have to move the charging/emptying station. The robot can charge automatically if necessary.
ON/STANDBY/SLEEP MODE/OFF
On
Switch on the robot vacuum machine using the power switch on the side of the machine.
Start the robot with the control button on the appliance using the remote control (see "Use with remote
control" or with the app (see "Use with app").
Standby
The machine is in standby mode when the on switch is on and the machine is in idle state, ready to be
used immediately. Both indicator lights
mode, you must first activate it before you can start the machine.
The robot will go into standby mode when you press the control button
button on the remote control or in the app.
Sleep mode
If the appliance is not activated within 10 minutes, it will automatically go into sleep mode. Both indicator
lights on the appliance will go out. You can do this by pressing the control button
appliance, the ON/OFF button
You can put the appliance into sleep mode yourself by pressing the ON/OFF button
control.
Off
You can turn off the machine completely by switching off the on switch on the side of the device while in
standby mode.
Should the robot not be planned for use for an extended period, it is advisable to switch it off.
USE WITHOUT REMOTE CONTROL
· Press the control button for automatic cleaning. The vacuum cleaner will plot its own path to vacuum
the entire area, taking walls, obstacles and stairs into account.
www.domo-elektro.be
on the appliance will light up. When the machine is in sleep
on the remote control, or by activating the appliance in the app.
on the appliance or the pause
on the
on the remote
DO7298S
81