Descargar Imprimir esta página

Linea 2000 DOMO DO7298S Manual De Instrucciones página 93

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 95
PROBLEM
The robot vacuum will return to the charging
station without completing its cleaning
programme.
The robot vacuum does not return to the
charging/emptying station after completing its
cleaning programme.
The robot vacuum does not empty automatically
after completing its cleaning programme.
The robot vacuumis not carrying out its
automated cleaning mode as set.
The remote control is not working.
The appliance is not cleaning properly.
The app cannot find the appliance.
www.domo-elektro.be
SOLUTION
·
The battery of the robot vacuum is almost
empty. The robot is going to recharge. When
it is sufficiently charged, it will resume the
programme.
·
Make sure the plug of the charging/emptying
station is plugged in; otherwise, the robot
vacuum will not charge.
·
Do not move the charging/emptying station
during robot cleaning.
·
Make sure there is a dust bag correctly
installed in the emptying station. If this is
not the case, the indicator light will not flash
white, and the emptying station will not empty
automatically.
·
Make sure the settings under "Collect dust" in
the app are not set to "Never".
·
Turn the appliance on.
·
Allow the robot vacuum to charge fully first.
·
Switch the appliance off and thoroughly clean
the dust collector as well as the side brushes
and the wheels before putting the appliance
back to work.
·
Replace the batteries and place them in the
remote control correctly.
·
Ensure the robot vacuum is switched on and
sufficiently charged.
·
Do not use the remote control near the
charging station as it may interfere with the
signal.
·
Ensure that there are no obstacles between
the vacuum cleaner and the remote control as
this may interfere with the signal.
·
Ensure that the room to be cleaned is closed
off, do not leave doors open.
·
Ensure that there are no loose wires or other
loose objects on the floor.
Press and hold the control button for several
seconds until the Wi-Fi indicator flashes rapidly.
The appliance is now ready to connect.
93
DO7298S

Publicidad

loading