Publicidad
Idiomas disponibles
Idiomas disponibles
TIMER
Browse through the different functions until the upper
display shows [TIMER].
Usage
Standard
• Press A to start or stop the timer.
• Press C to restart the timer.
• Once the alarm rings, press B to stop it.
Setup
• Keep B pressed in until the lower display [HH:MM:SS] flashes.
• Press B. [HH:MM:SS] will start flashing.
• Press A to increase the number or C to decrease the number.
• Press B to validate and set up the next number. [HH:MM:SS] will start flashing.
Please repeat this operation until all numbers are set.
• [HH:MM:SS] will flash again. Press B to validate the setup.
Nota bene
H for hours / M for minutes / S for seconds
TIMER
AEROSPACE
CHRONOMETER
HH:MM:SS
42
SPECIAL CHARACTERISTICS
A
RIDER-TAB BEZEL
B
The bezel of your watch is fitted with 4 hour-markers called
rider-tabs : they are used as points of reference to mark a start
time or a limit time you wish to remember. On models without
C
a chronograph, they also provide a "minute chronograph"
function enabling you to measure time elapsed in minutes.
Rider-tabs make it easier to rotate the bezel by giving a better
grip (especially when wearing gloves) and additionally protect
the glass.
43
Publicidad
